Reset your Holosun EPS Carry Red Dot Sight

Occasionally, you may need to restore your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the settings or are experiencing unexpected issues. Fortunately, resetting your Holosun is a straightforward process that can be performed in just a few actions.

Initially ensuring your red dot sight is activated.
Locate the small button for reset on the bottom of the sight.
Utilize a paperclip to depress the reset button for approximately 5 seconds.
Let go the reset button and your Holosun EPS Carry Red Dot sight will power cycle.
The red dot sight should now be returned to its factory settings.

Reset Your Holosun EPS Carry Red Dot back to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to start fresh, resetting it to its factory configuration is a breeze. First, determine the tiny button on the rear of your optic. Then, keep pressed it for around five seconds until you see the indicator light change. Your Holosun EPS Carry is now reset to its factory settings, ready for consistent targeting.

restore Your Holosun EPS Carry Back to Life

Is your beloved Holosun EPS Carry experiencing some glitches? Don't despair! A simple factory reset can often resolve the problem and get your red dot sight back to its former glory. Before you begin, remember to remove the battery from your Holosun EPS Carry to prevent unexpected activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these straightforward steps:

Hold down the power button for approximately 7 seconds.
An indicator will flash, indicating that the reset is successfuly initiated.
Stop pressing the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can re-attach website the battery and test your sight's functionality. If you encounter any further problems, don't hesitate to contactsupport team.

Revert Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Follow these steps carefully to ensure a successful factory reset.

Beginning with, Activate your Holosun EPS Carry by pressing the power button.
Next, press and hold both the mode button and the up/down adjustment button simultaneously.
While continue holding these buttons, tap the power button once.
The display will show a confirmation prompt indicating that the reset process is initiated.
Allow the process to finish. This may take a few moments. Once done, your Holosun EPS Carry will automatically shutdown.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Clear All Settings on Your Holosun EPS Carry

To Factory reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Pressing a specific button combination. Consult your Instruction for the exact button sequence for your model. Once in the settings menu, look for an option that says "Reset All". Select this option and confirm the reset. Your sight will then power off and restart with all settings Restored to their default values.

Reset your Holosun EPS Carry with a Factory Original Settings

If your Holosun EPS Carry is acting up, a factory reset might be the answer. This will return your sight to its original settings, clearing any personalized configurations you've made. To execute this reset, adhere to these easy steps:

To begin, locate the reset lever on your EPS Carry.
Secondly, use a small object, like a toothpick, to activate the reset lever.
While hold the reset switch engaged, turn your EPS Carry.
The sight will blink a message showing that the reset is successful.

After the reset is complete, your EPS Carry will be returned to its factory settings.